Drayton digistat scr installation manual

 · This is easily achieved by commissioning each Digistat and SCR in turn. 1. Install (see installation instructions) and turn power on to the SCR (receiver). If a separate programmer is fitted, ensure that it is switched on. The red LED should come on. 2. View the manual for the Drayton Digistat+1 here, for free. The Digistat SCR (receiver) should be mounted in a convenient position, close to the boiler or central heating system. For the best performance install in an open space, at least 30cm distance from any metal objects including wall boxes and boiler housing. It is recommended that the SCR is mounted on the wall nearest the final location of the Digistat+RF programmable room. Installation 1. Remove the front cover using a flat screwdriver and separate from back plate (Fig 1). 2. Fix the back plate directly onto the wall using suitable wall plugs and screws or mount over existing wall box (Fig 2). 3. Complete the wiring according to the connection suggestions shown in Fig 3. For Basic boiler, Combi boiler and Basic boiler.

The Digistat SCR (receiver) should be mounted in a convenient position, close to the boiler or central heating system. For the best performance install in an open space, at least 30cm distance from any metal objects including wall boxes and boiler housing. It is recommended that the SCR is mounted on the wall nearest the final location of the Digistat+RF programmable room. This is easily achieved by commissioning each Digistat and SCR in turn. 1. Install (see installation instructions) and turn power on to the SCR (receiver). If a separate programmer is fitted, ensure that it is switched on. The red LED should come on. 2. View the manual for the Drayton Digistat+1 here, for free. Digistat RF to the wall (see installation instructions). seconds each time a radio signal is received from the Digistat RF. This will occur approximately every 5 minutes. replacement Digistat RF or SCR is fitted. must arrange for a competent electrician to install it for you. Wiring must conform to the current IEE regulations. is switched off.

The boiler is an Intergas HSE combi controlled by a Drayton Digistat WR1 (nee SCR) receiver, which receives its instructions from a Drayton. 19 thg 3, The Firmware wasdeveloped for Alfa Wireless and Bluetooth, apied to R36 and dvd inEnglish. ease drayton digistat scr instruction manual. Drayton Digistat+3 RF 7 Day Wireless Programmable Room Thermostat with SCR RFN. Product code Double tap to zoom swipe to view more.